Alba LE-28GA06-B3+DVD Instruction Manual page 48

TV systems management
Let's get started
Language
The on screen display language is set to English .
Audio Languages/ Audio Languages2
Audio Language is the language certain items are played
in, depending on availability.
Press the button to select the Audio Language. Press
the OK button to the sub menu, then use the
to select either Primary or Secondary then press the
button.
Select your preferred language from the selection using
the buttons, press the OK button to confirm. Press
the MENU button to return to the SETTINGS menu.
Subtitle Language/ Subtitle Language 2
Subtitle Language is the language certain items are played
in, depending on availability.
Press the button to select the Audio Language. Use the
buttons to select either Primary or Secondary then
press the button.
Select your preferred language from the selection using
the buttons, press the OK button to confirm.
Press the MENU button to return to the SETTINGS menu.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
TV systems management
48
Hearing Impaired
Shows additional information for people with impaired
hearing when switched on (if supported by the
broadcaster). Use the
then use the OK button to switch On or Off.
PVR File System
buttons Use the button to select PVR File System then press the
OK button to open the PVR File System submenu.
Select Disk: Lets you select the USB drive you wish to
check using the
disk to check using the
Timeshift Size: This lets you choose the amount
of memory the Timeshift function can use on a
connected USB device. Choose between 512MB / 1GB
/ 2GB / 4GB using the
Format Start: Use this to reformat the USB drive, press
the OK button to start.
Speed Check: Use this feature to check the speed of
your USB drive by pressing the OK button.
First Time Installation
Use the button to select First Time Installation then
press the OK button.
This will now rescan all available TV and radio channels.
Software Update (USB)
Insert the USB drive with the update on it into one of the
USB ports on your TV then turn your TV on by pressing
the power button. Follow the on screen information to
update your TV.
button to select Hearing Impaired
buttons. You can then select which
buttons.
buttons.