Picture Menu - Alba LE-28GA06-B3+DVD Instruction Manual

TV systems management
Let's get started

PICTURE MENU

This menu allows you to select the best preset picture
mode or change them yourself.
Note: The menu shown in the diagram has been
extended to show all available options. You will need to
use the buttons to scroll through the menu to view
all of the options.
PICTURE
Picture Mode
Standard
Dynamic
Contrast
Brightness
Sharpness
Move
Select
OK
PICTURE
Colour Temp
Cool
Aspect Ratio
Advanced Settings
Move
Select
OK
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
TV systems management
38
1/8
Movie
50
50
Colour
50
50
Adjust
Exit
EXIT
6/8
Normal
Warm
16:9
Adjust
Exit
EXIT
1. Press MENU button to display the main interface, then
use buttons to navigate and select PICTURE
menu and press OK button to enter.
2. Press buttons to select the following options and
use buttons to adjust each option's setting.
Picture Mode: Choose between Dynamic / Standard /
Movie / Personal modes.
Contrast: Adjusts the difference between light and dark
levels in the picture.
Brightness: Increases or decreases the amount of white
in the picture.
Colour:Adjust the value of colour.
Sharpness:Adjust the level of crispness in the edges
between light and dark areas of the picture.
Colour Temp: Choose between Cool/Normal/Warm. The
colour temp changes the amount of blue and red in your
picture.
Aspect Ratio: Choose to view the TV picture in various
formats. Choose from AUTO / 4:3 / 16:9 / Zoom 1 /
Zoom 2.
Advanced Settings：Adjust the following options: Noise
Reduction, White Balance, Blue Screen, Backlight,
Gamma and Reset.