Alba LE-28GA06-B3+DVD Instruction Manual page 41

TV systems management
Let's get started
Analogue Manual Tuning
(only available in ATV mode)
IMPORTANT: This feature is not available in the UK as
analogue signals are no longer broadcast.
1. Press the buttons to select Analogue Manual
Tuning and press OK to display the menu.
2. Use buttons to select the desired option and then
use buttons to set each option.
Analogue Manual Tuning
Storage To 1
System BG
Current CH 1
Search
Fine-Tune
Frequency 867.875 MHz
Move Adjust
Storage: Select the storage location of the channel
System: Select system between I / DK / L / M / BG
Current CH: Display the current channel information
Search: To search through the different frequencies until
you find the program you want.
Fine-Tune: select FINE-TUNE to do small adjustments to
improve the signal
IMPORTANT:If the number about to save is the same
as a channel that is already being used, the manually
adjusted channel will replace the existing channel.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Digital Manual Tuning
1. Use the
2. The Digital Manual Tuning menu will now display.
3. Press the
Back
MENU
4. Press the OK button and the search for available
5. Once the signal has been tuned the signal strength will
6. The menu will close and the tuned channel will be
button to select Digital Manual Tuning
and press OK on the remote control to display the
submenu.
Digital Manual Tuning
UHF CH 21
DTV
Radio
Data
NO SIGNAL
Frequency 474 MHz
Bad Normal
Adjust
buttons to select the desired UHF
channel.
stations on that channel will begin.
be displayed on the screen.
shown on your TV screen.
TV systems management
0
0
0
Good
Back
MENU
41