Lucci fini AIRFUSION A Installation Instructions

Installation Instructions

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before using the product. Please keep instructions for future reference.

Warranty


This fitting is covered by a 2 year warranty from the date of purchase. Please retain proof of purchase.

Warranty will be void if there is any damage due to improper usage or modification to the fitting.

Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void
warranty.

Installation requirements


Must be installed by a licensed electrician.

All wiring and installation of the light fitting must adhere to local and national wiring rules.

Select a suitable location for installation:
This product is suitable for indoor use only.
-
This product is suitable for dry locations only.
-

Take care not to pull any electrical wires during unpacking as this may damage the connection.

Lay out all the components on a smooth surface and make sure there are no components missing before
assembling.

Check whether the fitting has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.

Ensure power to the circuit you are working on has been switched OFF.

Installation directions

1. Remove all packaging material from the product.
2. Remove the bottom cover from the body of the fan.
3. Remove the light kit bracket (A) from the lamp body (B).
4. Install the light kit bracket (A) to the fan light bracket (C) by tightening the 3 screws provided (D).
5. Pull the Live (L, Blue) and Neutral (N, white) light wires (E) out from the fan body carefully. And remove the
shrinkable sleeve from the light wires.
6. Connect the Live light wire (L, Blue) from fan body to Live wire (L, Black) of the light kit by tightening the wire nut
(F), make sure there are no loose wire strands or connections.
7. Connect the Neutral light wire (N, White) from fan body to Neutral wire (N, White) of the light kit by tightening the
wire nut (F), make sure there are no loose wire strands or connections.
8. Attach the lamp body (B) to the light kit bracket (A) and secure by turning it clockwise.
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
For customer support, please contact:
Tel: +1 (949) 800 8488
1 | P a g e
AIRFUSION TYPE A LED LIGHT KIT
SKU#21101201, 21101301, 21101401, 21101501
Rated Voltage 120V~ 60Hz
Email: support@beaconlighting.us
www.beaconlighting.us.
V 1 . 1 ( 0 3 - 2 0 1 9 )