Features; Operation; To Switch On; To Switch Off - Fox Micron TXR Plus Operating Instructions Manual

U K
MICRON TXR
PLUS
TRANSMITTER
TRANSMISSION LED
INDICATOR
2
MICRON TXR
TRANSMITTER
TXR Plus Receiver and TXR Plus Transmitter units are
designed to add remote capability for up to 4 bite
alarm heads of any make, using 2.5mm or 3.5mm out-
put sockets. Leads and plugs in both sizes are sup-
plied.
ON/OFF
BUTTON

FEATURES

• On/Off Button
• Four input sockets with waterproof cover
• Range test mode
• Four different output tones
• Red LED to indicate transmission
• FM transmitter with up to 500 metre range
(dependant on conditions)
• Operates from 1x 'AAA' battery
• Long battery life
• Low battery indication feature
• Sealed weatherproof case
• Protective coated electronics
• Digital circuitry
• Factory programmed unique ID code (no need for
code selection switches)
• Bracket for mounting unit to buzzer bar
PLUS
• Set of numbered leads with right angle plugs
• Compatible with Halo Elite remote bivvy light

OPERATION

NOTE: Before using your system for the first time, it is
necessary to "register" the transmitter with the TXR
Plus receiver. (See TXR Plus receiver "Registration
Mode" on page 10 for details).
The following instructions assume that the TXR Plus
receiver is already switched on and that the registra-
tion procedure has already been done.

TO SWITCH ON

Press and release (ON/OFF) button. A three note
sequence will be heard from the receiver and the red
LED on the transmitter will flash briefly.

TO SWITCH OFF

Press and release (ON/OFF) button again. A single low
note will be heard from the receiver and the red LED
on the transmitter will flash briefly.
U K
3