Clas Ohlson iHere Bluetooth 4.0 Manual

iHere3 - Key Finder
Art.no 36-5807 Model iHere Bluetooth 4.0
Please read the entire instruction manual before
using the product and then save it for future
reference. We reserve the right for any errors
in text or images and any necessary changes
made to technical data. In the event of technical
problems or other queries, please contact our
Customer Services.
Safety
• Never expose the key finder to impacts, shocks,
rain or moisture.
• Do not leave the key finder exposed to direct
sunlight for prolonged periods.
Bluetooth connection – Android
1. Download the iHere3 app from Google Play
and install it on your phone.
Note: You must write the name exactly as it
is written here: iHere3, without a space, and
you must write the whole name; you can't
miss off the 3 for example.
2. Activate Bluetooth on your telephone.
3. Press .
4. Press Settings in the box that appears on
the display.
5. "Scan device" will then appear on the display.
GREAT BRITAIN
customer service tel: 020 8247 9300
6. Hold in the button in
the middle of the key finder
for 3 seconds.
7. The name of the key finder will appear in
the device list on the display.
8. Press the name, the key finder will beep and
your position will be shown on the map.
9. Follow the instructions given by the app
regarding settings and function selection.
Bluetooth connection – iOS
1. Download the iHere3 app from App Store
and install it on your phone.
2. Activate Bluetooth on your telephone.
3. Allow "iHere3" to access your location info
when you are asked by the app.
4. Hold in the button in
the middle of the key finder
for 3 seconds.
5. Press Connect on the app.
6. The key finder will beep and "Connected" will
appear on the app.
7. Follow the instructions given by the app
regarding settings and function selection.
e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
Care and maintenance
Use a dry cloth to wipe the key finder clean
when needed.
Changing the battery
1. Use an appropriate
object to carefully
pry the top and
bottom sections apart.
Note: Make sure the wires connecting the top
and bottom sections are not damaged.
2. Change the old
battery with a fresh
(CR2032) battery.
Remember to insert
the new battery with
the plus side on top
and facing you.
3. Carefully refit the two sections back together
again.
Disposal
This product should be disposed of in accordance
with local regulations. If you are unsure how to
proceed, contact your local council.
Specifications
Battery 1 × CR2032
Standby time 6 months
30–50 m
Range
Size 50 × 10 mm