CONDENSE DRAINAGE
The indoor unit is fitted with condense drain pipe
which a drainage hose ( inside 16 mm) should be
connected, leading to a suitable drainage outlet area.
Fasten the condensate drain pipe to the refrigerant
pipes with adhesive tape whenever the lines cross
through a wall; this is to prevent the condensate drain
pipes from being crushed .
The drainage pipe should have a 3-5° inclination
down towards the drain; it should never be inclined
upwards.
Check all the joints for leaks.
The condensate drain pipe should be inserted into the
couplings located on the bottom left or right part of the
indoor unit.
Carefully check the condensed water
outflows from the pipe easily.
3-5°
ENGLISH -13-