2.5 CONNECTING THE PIPES ON THE
INTERNAL UNIT
B
Hook the unit on the wall mounting support, by
A
A
B.
matching
into
Line up the pipes of the indoor unit together with the
ones of the outdoor unit and screw manually the
unions.
DO NOT FORCE THE SCREWING WITH TOOLS IF
THE LINE UP OPERATION ON THE THREAD
PARTS IS NOT PERFECTLY EFFECTED.
Then, tighten with the help of a dynamometric key by
respecting the details quoted in the previous page.
Put then the pipe insulating back to its position and
complete the operation by adding polyethylene tape.
It is advisable to insulate the moisture drainage pipe
with the cooling pipes in order to have the pipes all
together in one block (FIg.3).
Position back the unit and fix it on the wall mounting
support with the fixing screws placed in the bottom
part (Fig.4).
ENGLISH -12-