Before Installing
Installation Procedures
This projector is adjusted at the factory for projection
on a 100-inch front projection type screen when the
projector is installed on the floor/desk. If you install
the projector under other conditions, modifications of
some parts in the projector are required. Therefore,
installation procedures vary depending on the screen
size, installation method and type of screen.
Floor Installation Using Front Projection
Flat Screen
Select the screen size.
70-149 inches
Install the screen and the projector in accordance with the
standard measurements. (Page 8)
Adjust the lens focus. (Page 26)
Adjust the registration. (Page 27)
6
Installation
150-250 inches
Change the CRT spacers.
(Page 19)
Adjust the lens spacers.
(Page 23)
Ceiling Installation Using Front Projection
Flat Screen
Select the screen size.
70-149 inches
Change the polarity. (Page 24)
Install the screen and the projector in accordance with the
standard measurements. (Page 9)
Adjust the lens focus. (Page 26)
Adjust the registration. (Page 27)
150-250 inches
Change the CRT spacers.
(Page 19)
Adjust the lens spacers.
(Page 23)