4
Insert the supplied 0.8 mm spacers s for 100" rear projection, 0.2 mm
spacers t, the spacers for 100" projection and G spacers as follows:
When the angle of optical axis is 0°
Blue and red CRTs: A 0.8 mm spacer s and the spacer for 100"
removed in step 3 for the top, the spacer for 100" removed in step 3 for the
bottom
Green CRT: A 0.8 mm spacer s and the G spacer removed in step 3 for
the top, the G spacer for the bottom
R
0.8 mm spacer s for 100"
rear projection (supplied)
G
B
G spacer
Spacer for 100" projection*
* Spacers removed in step 3
Installation
21