Siemens SIMATIC SCALANCE W788C-2 Series Operating Instructions Manual page 38

Connection
5.4 Antenna connectors
①
②
③
④
⑤
⑥
Figure 5-1
N-Connect for degree of protection IP65
The SCALANCE W788C-2 M12 has antenna sockets of the type N-Connect, 3 on the top
and 3 on the underside of the device.
Note
Cabinet installation
When installing the SCALANCE W7x8 in a cabinet, you need to use detached antennas. A
suitable flexible connecting cable for a connection between SCALANCE W7x8 and a
detached antenna are available from SIMATIC NET. You will find detailed information in the
section Accessories.
38
R1A1
R1A2
R1A3
R2A1
R2A2
R2A3
Antenna connector IP30
SCALANCE W788C-2
Operating Instructions, 07/2019, A5E03692120-14