DynaMetric TLP-102 Quick Start Manual

DynaMet r i c
The TLP-102 Telephone Recording Adapter adapts most single or multi-line phones,
analog or digital, to your computer soundcard.
containing both sides of the phone conversation, to your computer soundcard. When
used with web conferencing software, it allows you to record the telephone audio
portion synchronized with your conferencing software.
The TLP-102 connects quickly and easily, with no special tools, to the telephone via the
modular handset connector. See the diagrams and installation instructions below.

INSTALLATION INSTRUCTIONS

1 Unplug the coil cord from the base of the phone and plug it into the modular jack on
the TLP-102.
2 Plug the short (~12 inch) cable on the TLP-102 into the phone base where the coil
cord was plugged.
3 Plug the long (~6 foot) cable on the TLP-102 into the Mic Input of your sound card.
That's it!
FOR LEGAL USE ONLY
www.DynaMetric.com
717 SOUTH MYRTLE AVENUE • MONROVIA, CALIFORNIA 91016-3422
626-358-2559 • FAX 626-359-5701 • 800-525-6925
TLP-102
Computer/Telephone Audio Adapter
P/N 39041
See below for handset and headset instructions.
Page 1 of 3
It provides a clear audio signal,
11/01
©DynaMetric 2001