Fisher-Price 71249 Instructions Manual page 8

Slumbertime soother with remote control
Hide thumbs Also See for 71249:
Table of Contents

Advertisement

Important Note: When using the remote, make sure that the
arrow on the soother's receiver dome is pointing towards the
transmitter on the remote. For best results, the path
between the transmitter on the remote and the receiver on
the soother should be in direct line of sight and free of
obstacles. Rotate the receiver dome so that the arrow on
the dome points to the area from which you're most likely
to use the remote. For example, if you'll most often be using
the remote from the doorway of the nursery, make sure that
the arrow on the receiver dome is pointing towards the
doorway and that the path between the receiver and the
doorway is free from obstructions.
Long Play Mode
Plays a medley of 10 different relaxing lullabies for approx-
imately 10 minutes to a gentle light display featuring cute and
sleepy crib friends.
• Press the button on the soother or the remote at any time
during play to stop the music and light display.
• When the lullaby medley ends, the receiver remains active
and will blink for up to four hours. Press the button on the
remote or the soother to restart the lullaby medley. After
approximately four hours without activation, the receiver
times-out and will stop blinking. Press the heart button on the
soother to restart the lullaby medley and light display and
reactivate the remote. Or, to reactivate the remote without
restarting the lullaby medley and light display, move the
mode switch.
Short Play Mode
Choose any one of the 10 lullabies from the long play medley.
The lullaby plays to a gentle light display featuring cute and
sleepy crib friends.
• Press the button on the soother or the remote to play the first
lullaby and start the gentle light display. To skip to a different
lullaby, press the button again to stop the first lullaby. Press
the button to start the second lullaby. Keep pressing the
button to cycle through all 10 lullabies.
• When the selected lullaby ends, the receiver remains active
and will blink for up to 30 minutes. Press the button on the
soother or the remote to start the next lullaby. After
approximately 30 minutes without activation, the receiver
times-out and will stop blinking. Press the heart button on the
soother to restart the first lullaby and light display and
reactivate the remote. Or, to reactivate the remote without
restarting the lullaby and light display, move the mode switch.
8

Advertisement

Table of Contents
loading

Table of Contents