Page 1
Slumbertime Soother with Remote Control Model Number 71249 • Please keep these instructions for future reference. • Requires four size “C” (LR14) alkaline batteries in soother and two size “AA” (LR6) alkaline batteries in remote. (Batteries not included.) • Tool required for battery installation: Phillips screwdriver (not included).
Page 2
Soother Features ® Front Rear Carry Handle..Sturdy carry handle allows you or your child to take Slumbertime Soother wherever you go! Receiver Dome..Receiver blinks when it is ready to accept a signal from the remote. Dome rotates to align with the transmitter on the remote.
Remote Features Front Rear Button...Press to activate Slumbertime Soother when the receiver on the soother is blinking. Please note: If the receiver on the soother is not blinking, the soother is not ready to accept a signal from the remote. LED Signal Indicator...Lights when the button is pressed to let you know the remote has transmitted a signal.
Battery Installation Soother Remote Battery Compartment Soother • Locate the battery compartment door on the back of the soother. • Unfasten the screws in the battery compartment door with a Phillips screwdriver. • Open the battery compartment door and insert four size “C” (LR14) alkaline batteries in the correct polarity as indicated in the battery compartment.
Battery Tips • Do not mix old and new batteries. • Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium ) batteries. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product and dispose of them safely.
Page 6
Receiver Remote Dome Pocket Crib Rail Fastener Cord Fastener Strap • Position the soother against the crib rail with the front of the soother facing the interior of the crib. • Wrap the fastener straps over the top of the crib rail. •...
Page 7
Slumber Time! Important Notes: • In the unlikely event that use of the Slumbertime Soother remote interferes with normal use of other remote controlled equipment, such as televisions and stereos, or use of other electric or battery powered appliances interfere with operation of Slumbertime Soother, do not use both appliances at the same time.
Page 8
Important Note: When using the remote, make sure that the arrow on the soother’s receiver dome is pointing towards the transmitter on the remote. For best results, the path between the transmitter on the remote and the receiver on the soother should be in direct line of sight and free of obstacles.
Do not immerse the soother or remote. FCC Note (United States Only) Slumbertime Soother with Remote Control Model Number: 71249 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may...