Table of Contents
Advertisement
Remote
Pocket
Peg
Fastener Strap
• Position the soother against the crib rail with the front of
the soother facing the interior of the crib.
• Wrap the fastener straps over the top of the crib rail.
• Fit a slot in each strap over the peg on the back of the
soother. Make sure the receiver dome on the soother is
above the crib rail so that the crib rail will not obstruct
remote activation.
• Tie the fastener cord on the back of the soother around the
nearest side rail.
• Slumbertime Soother is portable for take-along fun and can
be used long after your child outgrows the crib! Your child
will love using the remote.
• Fit the top slot in each strap over the peg on the back of
the soother.
• Fit the end of each strap into the storage slots in the back
of the soother to secure the strap ends.
Take-Along Fun
6
Receiver
Dome
Fastener Cord
Storage Slot
Crib Rail
Peg
Top Slot
Peg
Advertisement
Table of Contents
