Jesco INFINA DL-AC-FLEX Indoor Hardwire Installation Instructions

INDOOR HARDWIRE INSTALLATION INSTRUCTIONS
Please read and save these instructions. Read carefully before using product. Protect yourself and others by observing all
safety information, warnings and cautions. Failure to comply with instructions could result in personal injury and/or damage
to product or property. Please retain instruction sheet for future reference.
DO NOT CUT OR SHORTEN INFINA. DOING SO CAN CAUSE RISK OF ELECTRICAL SHOCK.
IF YOU HAVE RECEIVED THESE PARTS FOR AN OUTDOOR
INSTALLATION, PLEASE CONTACT YOUR LOCAL REPRESENTATIVE.
All electrical connections must be in accordance with local codes, ordinances and the National Electric Code. This product
operates on 120 VAC
licensed electrician.
and/or strip light.
• Do not use if there is any damage to the light or cord insulation. Inspect periodically.
means that may damage the insulation or permanently attach to the building structure.
A
see page 3
DL-AC-FLEX-HW
Integral heatsink coverplate with
SURGE SUPPRESSOR
*DO NOT REMOVE SURGE SUPPRESSOR FROM INTEGRAL HEATSINK COVER PLATE
Removing the SURGE SUPPRESSOR from integral heatsink cover plate will result in violation of UL requirements, voiding the product warranty
© 2015 JESCO LIGHTING GROUP, LLC
IMPORTANT SAFETY INSTRUCTIONS
N O T F O R O U T D O O R I N S T A L L A T I O N S
INDOOR DIRECT WIRE INSTALLATION OPTIONS
RATED 120VOLT AC | 4.95Watt / Foot
B
see page 4
DL-AC-FLEX-HW-CNDT
Integral heatsink coverplate with
SURGE SUPPRESSOR and output
aluminum conduit
RISK OF ELECTRICAL SHOCK AND DAMAGING THE PRODUCT
www.jescolighting.com
support@jescolighting.com
Tech Support: 855.592.0029
Installation sheet subject to change without prior notice.
and
15 Harbor Park Drive 219 South 6th Ave
Port Washington, NY 11050 City of Industry, CA 91746
Main Line: 800.527.7796 Main Line: 855.654.0110
Fax Line: 855.265.5768 Fax Line: 626.333.2955
C
see page 7
DL-AC-FLEX-HW-RADJ
Integral heatsink coverplate
with SURGE SUPPRESSOR and 90°
connection for ¾" rigid raceway
Designed, Developed and
Assembled in the U.S.A
JW 02/01/2019 Page 1 of 9