Introduction; Build-In Features; Connecting The Module - Daffue MONOLOG User Manual

1. INTRODUCTION

The MONOLOG Module was designed as a Single Door Access and Alarm Controller to be used as a Stand-Alone Controller.
The High Level of Access Control makes it suitable for use at any location.
The flexibility of the MONOLOG makes it suitable for use in the following applications and a lot more:
- Home Access Control
- Office Access Control
- Etc. ...

1.1 Build-in Features

The MONOLOG was designed to be used at a wide variety of locations and the following features were added with this in mind:
•
9 to 18Volt DC Input Voltage
•
2Line 16Character LCD Module with Backlighting (Optional)
•
Status Indication
•
26Bit Weigand Reader with Keypad Reader Interface
•
Door Contact Monitor with Programmable Reader Buzzer and Alarm Output Contact
•
Contact for Door Control.
•
Real Time Clock with Battery Backup.
•
Keypad Programming Routines for Configuration of All Functions
These features could be build up modularly to cut on product cost and prevent the wastage of unused features.

2. CONNECTING THE MODULE

Daffue Electronic Solutions cc – MONOLOG Users Manual - Issue 1B 24/08/2009 Page 3/8