Page 1
MONOLOG Single Door Stand-alone Door and Alarm Controller Module USER MANUAL Version: 1B 24 Augustus 2009 Daffue Electronic Solutions cc – MONOLOG Users Manual - Issue 1B 24/08/2009 Page 1/8...
2.7.2.10 RTC Set-up (Real Time Clock) (10) -Optional ........................7 2.7.3 Exit Menu and Return to Normal Operation........................7 3. USE THE UNIT ..................................7 4. CONTACT INFORMATION..............................8 Daffue Electronic Solutions cc – MONOLOG Users Manual - Issue 1B 24/08/2009 Page 2/8...
- Office Access Control - Etc..1.1 Build-in Features The MONOLOG was designed to be used at a wide variety of locations and the following features were added with this in mind: • 9 to 18Volt DC Input Voltage •...
When the unit is installed at its location it is wise to adjust the contras of the LCD to its optimum level, to make sure the display is clear and readable. Daffue Electronic Solutions cc – MONOLOG Users Manual - Issue 1B 24/08/2009 Page 4/8...
2.7.2 Menu Items in Main Menu 2.7.2.1 Master Tag Programming (01) NOTE: The Monolog is limited to 5 Master Tag Program Cycles and after that would not accept Master Tag Programming Permanently. STEP 1 – Unit must be in Main Menu – 2 Long Flashes STEP 2 –...
0 – Nothing happens when the door is forced open 1 – External Alarm Sounds when door is forced open STEP 6 – Enter 2 Digit Siren On Time (00 to 99) Daffue Electronic Solutions cc – MONOLOG Users Manual - Issue 1B 24/08/2009 Page 6/8...
In the event of the power going off, all the features, Real Time Clock and other data would be reloaded automatically on switch on of the power and would provide an seamless reactivation of functions. Daffue Electronic Solutions cc – MONOLOG Users Manual - Issue 1B 24/08/2009 Page 7/8...