G-U K-C2060 Installation Instructions

Door Multi-point Locking System
Gripset Handle Installation Instructions
for K-C2060/K-C2070
SALEM (K-C2060)
5
BERKELEY (K-C2070)
* Set as Right Hand (RH) in packaging
HANDLE HANDING
(VIEWED FROM OUTSIDE)
LEFT
HAND
INSWING
OUTSWING
Ferco Architectural Hardware Inc.
2000, Rue Berlier
Laval QC H7L 4S4
T 450.973.1437
F 450.973.7661
1.800.355.8810
www.ferco.ca
Edition 09.2014
4
1
3
RIGHT
HAND
LH on top. Insert four screws and retighten. Reposition the gasket.
Information in this document can be modified without notice.
2
REVERSING THE UNIVERSAL ACTUATOR
(ON THE EXTERIOR PLATE, UNDER THE GASKET)
TOP OF PLATE
The actuator is set Right Hand (RH) in the box.
To change handing to Left Hand (LH), take out gasket, remove
four screws from actuator and turn actuator 180 degrees to show
Inside the Box
Pos Description
Exterior handle set with
1
gasket and cylinder
2 Interior plate with knob
3 Interior handle
Two M5 x 65mm screws
(1 3/4'' doors), two M5 x
4
75mm screws (2 1/4'' doors),
one Allen key
5
Set of two keys
6 7
Bottom screw, screw washer,
6
screw cover
Handle nylon washer (only
7
supplied with Salem handle)
RH = RIGHT HAND
LH = LEFT HAND
03.5.1