Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
DISSASEMBLY INSTRUCTIONS
1. Assemble the Juice Collector:
- Ensure the spout on the juice collector
aligns with the spout slot in the motor base.
- Push down to connect the juice collector
with the motor base.
2. Fitting the Cutting Blade Disc:
- Hold the outside of the Cutting Disc and
lightly push into Juice Collector until disc
locks into place. Turn to ensure smooth
operation.
3. Assemble the Lid:
- Place the Lid onto of the Juice Collector /
Base, ensuring that the locking points match.
The lid should sit into the pulp container.
4. Lock the Safety Handle into place:
- Pull the handle into the lid locking grooves
completely, otherwise the machine will not
start.
5. Dissable the blades disc:
- With one hand grasping the spout, and the
other on the blade disc, separate the blade
disc from the drive socket
Page | 7
Advertisement
Table of Contents
