TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............4 VITAJUICE PRO WHATS IN THE BOX ............6 ASSEMBLY INSTRUCTIONS ..............7 VITAJUICE PRO BREAKDOWN DIAGRAM ..........8 OPERATING INSTRUCTIONS ..............10 CLEANING INSTRUCTIONS ..............11 TROUBLESHOOTING ................12 SERVICE & MAINTENANCE..............13 SPARE PARTS ..................
IMPORTANT SAFETY INSTRUCTIONS Please read all of the instructions before using the Vitajuice Pro Juicer and ensure that other operators also read and are made to understand all safety and operating instructions. Save these instructions for Future reference. Thank you for purchasing a Semak Vitajuice Pro Juicer.
Page 5
13.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, is dropped or damaged in any way. Return the appliance to Semak Australia. (Manufacturer) or its Authorised Service Agent for repair.
VITAJUICE PRO WHATS IN THE BOX Pusher Filter with blades disc Juice collector with spout Locking Handle Pulp Container Motor Unit Juice Jug Juice Jug Plate Page | 6...
ASSEMBLY INSTRUCTIONS 1. Assemble the Juice Collector: - Ensure the spout on the juice collector aligns with the spout slot in the motor base. - Push down to connect the juice collector with the motor base. 2. Fitting the Cutting Blade Disc: - Hold the outside of the Cutting Disc and lightly push into Juice Collector until disc locks into place.
Page 9
Item No. Description Pusher Polycarbonate Lid Disc Blade Assembly Juice Collector Assembly Drive Socket Juice Collector Rubber Buffer Upper Base Motor Middle Base Lower Base Locking Arm Roller Locking Arm Cover Front Touch Rod Touch Spring Touch Rod Track Rail Locking Arm Fixer Cover Touch Plate Safety Switch...
OPERATING INSTRUCTIONS Please save the operating instructions for future reference. Make sure all of the detachable parts are assembled correctly before use. Wash the fresh fruit and/or vegetable and cut them into small enough pieces (less than 75mm diameter) to fit down the feeding tube. Ensure that the relevant fruits/vegetables are skinned and cored if required.
CLEANING INSTRUCTIONS Always unplug the VitajuicePro from the power source before cleaning. 1. Disassemble all detachable parts referring to instructions 2. Clean all detachable parts by rinsing with hot water. All detachable parts may be cleaned excluding the motor unit or machine base parts. Wash with a HACCP safe detergent and rinse clean for more stubborn soiling.
TROUBLESHOOTING Problem Possible Cause Solution The Juicer does not No power connection Plug in unit to 220- work 240V AC outlet Parts have not been Check whether the assembled correctly handle has been slipped into the lock groove Increased vibration The juicer is not on a Place the juicer on a and noise...
If the product has been opened or tampered with (ie. In an attempt to repair it) the warranty is invalidated. It is against company policy to authorize warranty repairs over the phone. Service Agents will require a work order number from Semak to conduct warranty repairs. Page | 13...
Page 14
Failure to do this will void product warranty. 5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to be paid by the owner. 6. A charge will be made where failure is due to neglect, abuse or accidental damage on the part of the operator, or when no fault can be found or the fault is due to causes outside the control of Semak Australia.
WARRANTY REGISTRATION Retain for Future Reference DO NOT SEND Please complete one registration for each Semak appliance. You may be required to provide this information when requesting after sales service. Please staple your proof of purchase to this page. Company Name: ________________________________________________...