Cleaning Instructions - SEMAK VitaJuice Pro Operations & Warranty Manual

Table of Contents

Advertisement

CLEANING INSTRUCTIONS

Always unplug the VitajuicePro from the power source before cleaning.
1. Disassemble all detachable parts referring to instructions
2. Clean all detachable parts by rinsing with hot water. All detachable parts may
be cleaned excluding the motor unit or machine base parts. Wash with a HACCP
safe detergent and rinse clean for more stubborn soiling. A HACCAP sanitizer
may be used to minimize bacterial contamination. Repeat with fresh water until
the water runs clear.
3. Rinse the filter under the tap or wipe out residual with a soft brush (do not use
a hard brush to ensure you do not damage the fine micromesh filter)
4. Clean the motor unit with a damp cloth
5. Make sure the machine is clean and dry before you store it away.
 Do not place any of the components in a dishwasher.
 Clean motor base by wiping with a barely damp cloth only.
 Never immerse the motor end, plug or cord in water or any other liquid.
Page | 11

Advertisement

Table of Contents
loading

Table of Contents