Assembly - I-Panda 40A Series Manual

3.3 Identifying the Charge Controller
You can identify the charge controller by the type label. The type label is in the
enclosure.
4.

Assembly

4.1 Operator：technical personnel;
4.2 Selecting the Mounting Location
Danger:
Possible fire and explosion hazard
The charge controller enclosure may become hot during operation.
• Do not mount the charge controller on flammable construction material.
• Do not mount the charge controller near highly flammable materials.
• Do not mount the charge controller in potentially explosive areas.
• Do not expose the charge controller to direct sunlight to avoid power
loss due to overheating.
Caution:
Enclosure may become hot to the touch and may cause burns
• Mount the charge controller in such a way that it cannot be touched
inadvertently during operation.
4.2.1 Dimensions
L * W * H： 10.63*5.91*3.46 in
270mm*150mm*88mm
4.2.2 Net Weight
Weight：6.6Lbs or 3kg
4.2.3 Ambient Conditions
• The mounting location and method must be suitable for the weight and dimensions.
• Mount on a solid surface.
• The mounting location should be accessible at all times.
• The charge controller should be easy to remove from the mounting location at any
time.
• The ambient temperature should be between -4 and 140F (-20 and 60 °C) to
guarantee optimal operation.
7