I-Panda 40A Series Manual page 5

Symbols Label
Symbol Explanation
CE FCC CB ROHS mark；
The controller complies with the requirements of the applicable CE FCC CB
ROHS guidelines.
●Important Safety Instructions
When using the product, please do remember the below information to avoid fire,
lightning or other personal injury:
Warning!
Ensure input DC voltage is no more than Max. DC voltage (Voc) .Over voltage
may cause permanent damage to solar charge controller or other losses, which
will not be covered by the warranty! This chapter contains important safety and
operating instructions. Read and keep this operation guide for future reference.
Warning!
Authorized service personnel must disconnect both DC and battery bank power
from the solar charge controller before attempting any maintenance or cleaning
or working on any circuits connected to the solar charge controller.
● Before using the solar charge controller, please read all instructions and cautionary
markings on the solar charge controller, and all corresponding sections of this
guide.
● Contact I-Panda for any questions or concerns about your controller. Trying to
modify or repair it may result in a fire, electric shock, or injury.
● To reduce risk of fire and electric shock, make sure that existing wiring is in good
condition and that all wire is properly sized. Do not operate the solar charge
controller with damaged or substandard wiring.
● Do not disassemble the solar charge controller. It contains no user-serviceable parts.
See Warranty for instructions on obtaining service. Attempting to repair the solar
charge controller by yourself may result in a risk of electric shock or fire and will
void your warranty.
● To reduce the risk of electric shock, authorized service personnel must use
insulating tools when connecting or working on the controller.
● Keep away from flammable, explosive materials to avoid fire.
5