Table of Contents
Advertisement
1. Place your loading base on a flat surface with the embossed writing
facing up. This piece is solely used to help set up the pieces easily. Position
the rotisserie spit into the centre of the loading base.
2. Take the loading rack and slide it down the rotisserie spit ensuring that the
screw part is facing up. Slide it all the way until it sits on the loading base
then tighten the screw to lock it into position.
3. Slide the kebab skewer loading rack onto the top of the rotisserie spit, lock
gently in place as you may need to adjust.
4. Take one of the kebab skewers and place into one of the holes on the
loading rack at the base. The top of the kebab skewer needs to slot into
one of the groves on the kebab loading rack so that the rubber handle rest
on top, this may require you to adjust the height so that it fits. The pointed
top of the kebab skewer must rest within the hole at the base so that it
doesn't fall out when turned horizontally on its side.
5. Prepare your 7 kebab skewers as per your chosen recipe.
6. Place your kebab skewer into one of the holes at the base as before in step
4 ( it may be advisable to hold the end piece of food in place so that it
doesn't fall off while you load) then hook the rubber end onto the adjacent
recess on the kebab loading rack.
7. Repeat step 6 for all remaining kebab skewers until fully loaded.
KEBAB SKEWER OPERATION:
8. Remove your kebab set up from the loading base (this component must
not go inside the rotisserie Grill).
9. Place the drip tray into the base of the rotisserie Grill to catch the drippings.
10. Place the solid end of the rotisserie spit into the drive socket located at
the left hand side within the rotisserie Grill. Place the round plastic end of
the rotisserie spit onto the spit support located on the inner right hand
side.
11. Now that your rotisserie spit and chosen food is in position close the glass
doors ( this will trigger the micro switch that will allow the rotisserie Grill
to be turned on).
12. Set the temperature button to high and turn the time dial to the desired
cooking time. The 'Rotisserie light will illuminate to indicate that the
heating element is in the correct position and will start to cook. The
heating element reaches full heat very quickly thus not requiring
additional cooking time to accommodate for this. The rotisserie spit will
rotate and your food will begin to cook.
www.PyleUSA.com
10
Advertisement
Table of Contents
