Instructions For Use - Profi Cook PC-HM 1026 Instruction Manual

3. Push the blender stick (6) into the fixture until
it rests completely. Lock the blender stick by
turning it counter-clockwise as far as it will go.
Disassembly of the blender stick
In order to release the blender stick from the hous-
ing, turn it clockwise and pull it off.

Instructions for use

• For best results, use high-quality containers
that are not too big.
• In order to avoid splashing, submerge the
dough hooks or beaters into the food to be
mixed before switching on the appliance.
• After switching off the appliance, wait until the
motor comes to a complete stop before remov-
ing the dough hooks or beaters from the food.
• The appliance is suitable for small quantities
only! Fill containers with the maximum quanti-
ties only as indicated in the table!
Blender stick
Cut larger size ingredients into smaller pieces (max.
Ø 1.5 cm) and add some liquid before pureeing.
CAUTION:
Do not use the blender stick for cutting hard
foodstuff such as coffee beans, nutmeg or ice
cubes. This could damage the product.
Electric operation
1. Make sure the switch (1) is at the "0" position.
2. Before you plug the mains plug into the outlet,
check whether the system voltage that you
want to use, matches the one of the appliance.
You will find information about it on the type
plate.
3. Connect the appliance to a correctly installed
grounded outlet.
Multi-function switch and button (1)
Speed settings for dough hooks or
beaters
Appliance off Switch position for
Blender stick
mode
Turning on/off
Using the dough hooks and beaters
• In order to switch on the appliance, set the
switch (1) to one of the positions from "1" to "5".
• When at the "0" position, the appliance is
switched off.
Using the blender stick
1. Set the switch (1) to the blender stick symbol.
2. Slide the TURBO button (2) downwards and
hold it firmly. The appliance will start operation.
3. When releasing the button, the appliance will
stop.
4. Set the switch (1) to the "0" position.
NOTE:
• The control lamp underneath the glass cover
shows you the operating mode.
• When assembling the blender stick, a safety
switch will deactivate the speed settings.
Speed settings
Switch position 1: lowest speed setting
Switch position 5: highest speed setting
(TURBO)
Turbo operating mode
All speed settings allow you to temporarily switch
to the highest speed setting. In order to do so,
slide the TURBO button downwards during opera-
tion. When activating the button in short intervals,
you will achieve a pulse operation.
ejecting the dough
hooks or beaters
43