privileg CM1121-GS User Manual page 39

the button on the control
6 6 6
panel (7) will light up.
6. Select the desired quantity of
coffee by pressing the
or button.
6 6 6
7. The coffee strength can be
– increased by pressing the
button. The LED be-
hind the button will light up.
– reset to 'normal' by pressing
the button again.
8. To start the grinding and brew-
ing process, press the
button. The grinding process
will begin after approx. 3 sec-
onds. Approx. 3 seconds after
the grinding process ends, the
brewing process will start and
the coffee will gradually flow
into the glass jug. At the end of
the brewing process, you will
hear 3 beeps.
9. If you
– want to keep the coffee
warm, leave the glass jug on
the hotplate. The keep-warm
function lasts for 35 minutes,
after which the coffee ma-
chine will switch off automat-
ically.
– are finished using the coffee
machine, pull the mains plug
out of the socket.
,
2 2 2 4 4 4
than 1 minute, the LEDs on the
control panel (7) will go out.
Press the
ON
OFF
Use
Page GB-15
If there is power to the cof-
fee machine and you do
not press a button for more
button to reactivate.
6 6 6