Advertisement
Magellan Programming
Scan the following barcodes in order to program the device.
After making any of the following changes to the scale you will need to contact Weights and
Measures to make sure the scale are certified and weighing items properly.
When this barcode is scanned the green light on the top
of the scanner/scale will start flashing – This will make
the scale enter the programming mode.
When this barcode is scanned there will be an audible
Beep from the scanner/scale, confirming that it scanned
correctly. This barcode will erase any settings that have
been configured on the device so that we can program it
correctly.
When this barcode is scanned the scanner will reboot and
the green lights on the top of the scanner/scale will stop
flashing – This will make the scale exit the programming
mode.
When this barcode is scanned the green light on the top
of the scanner/scale will start flashing – This will make
the scale enter the programming mode.
5 |
P a g e
Advertisement
