Heartland pcAmerica Magellan SL Configuration And Programming Manual page 26

Code39 Symbology Disable
When this barcode is scanned the green light on the top
of the scanner/scale will start flashing – This will make
the scale enter the programming mode.
When this barcode is scanned there will be an audible
Beep from the scanner/scale, confirming that it scanned
correctly. This barcode will disable the Code 39
Symbology.
When this barcode is scanned the green light on the top
of the scanner/scale will stop flashing – This will make the
scale exit the programming mode.
26 | P a g e