hazeltine ESPRIT Reference Manual page 36

Keystroke
(CTR L) with (1)
(CTR L) with (2)
(CTRL) with (3)
(CTRL) with (4)
(CTR L) with (5)
(CTR L) with (6)
(CTR L) with (7)
(CTR L) with (8)
(CTR L) with (9)
(CTR L) with (0)
NOTES:
HI-1094
Appendix C
Summary of Special Keyboard Commands
Function
MONITOR Mode Enable
MONITOR Mode Disable
Line Mode Enable or Disable (toggle) (See Note E)
Key-Click Enable or Disable (toggle)
Select Static Cursor
Select Slow Blinking Cursor
Select Fast Blinking Cursor
Select Block Cursor
Select Underline Cursor
Refresh RAM Test (toggle) (see Note C)
a: These commands are legal not only when using Hazeltine 1500 Family control codes but also in emulat-
ing Regent 25, or ADM-3A. They can be selected through the keyboard only.
b: Key-Click defaults to disable state at power on.
c: The first depression after
p~wer-on
will cause
every.by~e
of refresh RAM to be filled with 55 HEX.
A pattern of all background
"u"
characters is displayed with the cursor in the HOME position. A
second depression will fill refresh RAM with AA HEX. Another pattern of all foreground
"*,,
characters
is displayed. These characters are complements and result in storing both a 1 and a 0 in every bit
location. This feature is not available in BLOCK mode.
d: Use only the numeric keys on main keypad, not the numeric pad.
e: Line mode can be set by remote command "Set Line Mode" and will be reset to the NORMAL mode
by "Reset Block Mode" command.
'C-l