hazeltine ESPRIT Reference Manual page 28

J9\\
Hazeltine
\\£1
Reset BLOCK
Mode
Enable Auxiliary
Port With Display
Enable
Auxiliary
Port Without
Display
Disable
Auxiliary
Output
Remote Page
Transmit
Remote Field
Transmit
Yes
Yes
Yes
Yes
Yes
Yes
HI-1094
$
/
*
?
SO
On receipt of this command the
terminal enters the NORMAL mode.
On receipt of this command all
data received via the primary port
is displayed, processed and output
at the auxiliary port. I n half
duplex operation, keyboard entries
are transmitted via the primary port
The terminal defaults to this
condition at turn-on.
This command permits transmision
to an auxiliary device without
affecting the screen. On receipt
of this command, data (except the
AUX commands) received via the pri-
mary port is output to the auxiliary
port without processing or displaying
by the terminal.
On receipt of this command the
auxiliary output is disabled
and no data is output at the
auxiliary port. I nput remains
enabled.
On receipt of this command all
foregrou nd data on the
screen will be transmitted. The
end of transmission is indicated
by a selected End of Message
character. After transmission is
completed, the cursor is
repositioned to the first character
of the first foreground field on
the display.
On receipt of this command the
data in the foreground field in which
the cursor is currently positioned
NOTE: Remote AUX commands should be followed by a "NUL" code for one character synchronization.
-25-