hazeltine ESPRIT Reference Manual page 33

!~
Hazeltine
~,W
HI-1094
8.3 Monitor Adjustments (to be performed by Qualified Technician only)
If the display exhibits one or more of the faults listed below, remove the top cover and adjust the
control listed. Use only a plastic alignment tool to make monitor adjustments.
Problem
Raster shows behind characters
or display too dim and cannot be
corrected with CONTRAST control
Display rolls or part of the top
or bottom character row missing
Some character rows larger or
smaller than others
Display too wide or too narrow
Display too high or not high enough
Display out of focus
8.4 Self Test
Adjust
BRIGHTNESS
V.HOLD
V. LINEAR
WIDTH
V. HEIGHT
FOCUS
The Esprit terminal will perform a self test each time it is turned on and will display an error message
if a fault is detected. Refer to paragraph 2.5 for the meaning of the error messages.
-30-