Installation Steps; Product Specification; Output Specification - Thermaltake ATX 12V 2.2 Manual

06

3.2 Installation Steps

T
o prevent electrical shocks, please disconnect the power cord
from your existing power supply unit. Toughpower 750W PSU has
automatic Voltage Selector which will automatically change to
100V-240V.
I
nstallation Steps
3.2.1 Disconnect the power cord from your old power supply.
3.2.2 Follow your computer case manual and disassemble the case.
3.2.3 Disconnect all the power connectors from the motherboard
and from the peripheral devices such as case fans, hard
drives, floppy drives. etc.
3.2.4 Remove the existing power supply from your computer case
and replace it with your new Thermaltake Toughpower
750W PSU.
3.2.5 Connect the power connectors to the motherboard and
peripheral devices (refer to the rest of this manual to match
the various one-way key-locked connectors to the
motherboard and accessories).
3.2.6 Connect the 6-pin PCI Express connector to PCI Express
graphic card if you need.
Note: Please read the user manual supplied with your graphic card
for detail usage instructions.
3.2.7 Close the computer case.
3.2.8 Make sure your power supply switch is on "OFF" position,
and connect the supplied power cord to your Thermaltake
Toughpower 750W PSU.
Toughpower 750W
ATX 12V 2.2 & EPS 12V Version
Toughpower 750W
ATX 12V 2.2 & EPS 12V Version
4.

Product Specification

4.1 Output Specification

M
ain Power Connector
Voltage
24 12
+3.3 V
23 11
+3.3 V
22
10
COM
21 9
+5 V
20
8
COM
19 7
+5 V
18 6
COM
17 5
PWR_ON
16 4
+5 Vsb
15 3
+12 V
14 2
+12 V
13 1
+3.3 V
P
CI Express Connector (6 pin)
Color Color Voltage
Orange 1 13 Orange +3.3 V
Orange 2 14 Blue -12 V
Black 3 15 Black COM
4 16
Red Green PS_ON#
Black 5 17 Black COM
Red 6 18 Black COM
Black 7 19 Black COM
Gray 8 20 N/C N/C
Purple 9 21 Red +5 V
Yellow 10 22 Red +5 V
3
11 23
Yellow Red +5 V
3
Orange 12 24 Black COM
Color Signal Pin
Yellow 12V DC 1
2
Yellow 12V DC 2
2
Yellow 12V DC 3
2
Black COM 4
Black COM 5
Black COM 6
07