General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - DeWalt DCH243 Manual

*Date code 201811475B or later
**Date code 201536 or later
Batteries
Cat # V
DC
DCB546 18/54
DCB547 18/54
DCB548 18/54 12.0/4.0
DCB181 18
DCB182 18
DCB183/B 18
DCB184/B 18
DCB185 18
DCB187 18
DCB189 18
*Date code 201811475B or later
**Date code 201536 or later
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Cordless Rotary Hammerdrill
DCH243, DCH253, DCH254, DCH273, DCH274, DCH283
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
13.02.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Weight (kg) DCB104 DCB107
Ah
6.0/2.0 1.05 60
9.0/3.0 1.46 75*
1.44 120
1.5 0.35 22
4.0 0.61 60/40**
2.0 0.40 30
5.0 0.62 75/50**
1.3 0.35 22
3.0 0.54 45
4.0 0.54 60
WALT at
e
WALT.
e
Chargers/Charge Times (Minutes)
DCB112 DCB113 DCB115
270 170 140 90
420 270 220 135*
540 350 300 180
70 45 35 22
185 120 100 60
90 60 50 30
240 150 120 75
60 40 30 22
140 90 70 45
185 120 100 60

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.

GENERAL POWER TOOL SAFETY WARNINGS


WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
EnglisH
DCB118 DCB132 DCB119
60 90 X
75* 135* X
120 180 X
22 22 45
60/40** 60 120
30 30 60
75/50** 75 150
22 22 X
45 45 90
60 60 120
5