Changing The Atomizer Coil - InnoCigs CLTANK 2.0 CLEAROMIZER User Manual

INNOCIGS CLTANK 2.0 CLEAROMIZER – USING THE DEVICE

Changing the atomizer coil

1. Remove the top cap from the clearomizer, as described on page 24.
2. Remove the old atomizer coil, which is connected to the top cap.
3. Insert the new atomizer coil.
4. Finally, connect the components together again.
Please note the following:
Prior to first use, drip a few drops of your liquid on the atomizer coil and let it
sit before vaping. Please take several puffs without activating the atomizer and
leave the atomizer sit for 15 minutes in the e-liquid filled tank before use. Don't
clean atomizer heads with water. Because atomizer coils are wearing parts, they
must be changed regularly.
27