Thecus i Series User Manual page 68

RTC Access Failed
Warning
Reset Password
Info
Reset IP
Info
•
System config events
Level
Sys Config.
Info
Defaults Restored
Sys NVRAM OK
Info
Sys NVRAM IO
Error
Failed
Sys NVRAM is full
Warning
•
System maintenance events
Level
Firmware
Info
Upgraded
Firmware
Error
Upgraded Failed
System reboot
Info
System shutdown
Info
System Init OK
Info
System Init Failed
Error
•
LVM events
Level
VG Created OK
Info
Warning: Fail to access RTC device
Info: Reset Admin Password to default.
Info: Reset network settings set to default.
Type
Info: Default system configurations restored.
Info: The system NVRAM is active.
Error: Can't access the system NVRAM.
Warning: The system NVRAM is full.
Type
Info: System firmware has been upgraded
Error: System firmware upgrade failed.
Info: System has been rebooted
Info: System has been shutdown.
Info: System has been initialized OK.
Error: System cannot be initialized in the last
boot up.
Type
Info: VG <name> has been created.
- 68 -
Description
Description
Description