Help In Case Of Malfunctions - Lenz Digital plus LV102 Operating Manual

28

10 Help in case of malfunctions

Fault
LV102 is not ready for
operation (LED does not
shine)
LED flashes slowly.
LV102 is ready for
operation (LED shines),
locomotives do not run,
points and signals can not
be switched.
Possible cause
Electric power supply is
interrupted. Transformer
mains-plug not plugged in.
There has been a short-
circuit on the track system.
There is overloading.
The connection of the
amplifier and the track and /
or the switch decoders is
interrupted (terminals J and
K not connected).
Information LV102
Elimination of problem
Check wiring between
transformer and LV102,
plug in transformer mains-
plug.
Deal with the short-circuit.
Divide the system into
several coverage areas and
supply them with additional
amplifiers / transformers.
Check and correct the
connections.