Power Requirements Of Large Gauges - Lenz Digital plus LV102 Operating Manual

26
9

Power requirements of large gauges

The maximum current supplied by a single amplifier LV102 (LZV100)
does not suffice to provide a supply section of a gauge '0' layout
(scale 1:45) with power. To ensure adequate power supply, connect a
command-station-cum-amplifier LZV100 and an amplifier LV102 or
two amplifiers LV102 in parallel at the track output.
Particular attention should be paid to the following:
•
Parallel connection is possible only with a command-station-cum-
amplifier LZV100 and an amplifier LV102 or two amplifiers LV102.
•
You may not operate more than two amplifiers in parallel.
•
Each amplifier must be supplied by a separate transformer
TR150.
•
Both amplifiers must be set to the same output voltage.
Information LV102