Schedule List; Pvr/T.shift - Toshiba 24L3965 Owner's Manual

NOTES
Reminder is only available for programmes that haven't been
aired yet.
A storage device (space should be no less than 2G, transfer
rate should be no less than 5MB/s) must be attached to the
television for recording purposes.
The TV will record the programme even in standby mode.

Schedule List

Press [ Menu ] button on your remote, select Channel >
List. press the [ ◄ /► ] buttons to switch between schedule list and
Recorded list.
Schedule list
You can change scheduled recording information or cancel
scheduled recordings.
• Press the [ Red ] button to delete record or reminder list.
• Press the [ Yellow ] button to add record or reminder list.
• Press the [ Bule ] button to edit record or reminder list.
Recorded list
View the list of recorded programmes
• Press the [ Red ] button to delete record programme list.
• Select recorded programme in recording list, press [ OK ]
button to watch the recorded programme.

PVR/T.Shift

PVR
The PVR enables the user to easily record the digital television
content for later viewing. The function is to be used in DTV and
Satellite source. The format of the storage disk should be FAT32. This
option does not commence if the data storage device has not been
connected.
There are two options, one is to press [ GUIDE ] button on remote
control and then select a programme to record by pressing [ Red ]
button. Second one is to press [
Press the [ OK ] button to display the recording progress bar when
there is no progress bar appeared, press the [
record, a *.PVR file will be saved. The files can be played back
in Media or by pressing [ PVR ] button that one-click shortcut on
your remote.
General Operation
Schedule
REC ] button to record.
■
] button to stop
NOTES
The storage space of your USB device should be no less than
2G (for 15 minutes high definition video).
If the transfer rate of your hard disk is too slow, a pop-up
notice will appear, in this case, you can try another one.
The PVR function doesn't support analogue channels.
The schedule recording function is not available while you are
watching a programme that is currently being broadcast.
Some broadcasters may restrict to record the programme.
During the recording progress, channels locked with Channel
Lock(password needed) are disabled to watch.
The PVR function is disabled for scrambled channels(CI
module needed).
T.Shift
This option allows you to pause and rewind live TV. This function
operates by recording temporarily to a storage device. Please
ensure your storage device is connected and there is enough free
disk space. Otherwise the recording will not commence.
• Press the [ ►II ] button on your remote to pause the live
broadcast and enter time shift function. If the banner disappear
after a few of seconds, press the [ OK ] button on the remote to
display the banner again. Press the [ ►] button to play. Press the [
] button to rewind and press the [
• Press the [ II ] button to pause the programme. Press the [ ■ ]
button to exit the function and watch the current broadcast.
NOTES
When connecting a hard disk, always connect the mains
adapter of the connected device to the power supply.
The T.Shift function doesn't support analogue channels.
The storage space of the USB device should be no less than
1G.
The T.Shift function is disabled for channels locked with
Channel Lock.
13
] button to fast forward.