Printing A Status Sheet - Epson EPL-N4000+ Setup Manual

Printing a status sheet

1. Turn the power switch at the front of the printer on. The lights
and the display messages are changed in the following order:
All lights come on once and then turn off. The display shows
ROM check.
The display shows RAM check XXXMB, with the actual
memory size of your printer, including the memory size of
optional memory modules if installed, is displayed in place
of XXX.
The display shows SelfTest, and then shows Warming Up. The
On Line light comes on.
After about 60 seconds, the display shows Ready.
2. Press the Enter button. The display shows Status Sheet.
3. Press the Enter button again. The message on the display
starts flashing and the printer starts printing the status sheet.
4. Check the following points in the printed status sheet:
The printer can print the status sheet clearly.
The information on the options installed to the printer is
printed correctly. If you can find the installed option's
name under Hardware Configurations title, it means
that the printer can recognize the installed option
properly.
Note:
The total printer memory is the standard 64 MB plus all
installed DIMM. For example, if you install a 32 MB DIMM,
the total printer memory is 96 MB.
60
Testing and Connecting the Printer