Need Help Capturing Your Video - Adaptec VideOh! DVD AVC-2210 User Manual

VideOh! DVD AVC-2210 User's Guide

Need Help Capturing Your Video?

If your analog video device, such as a VCR or camcorder, is not
powered on, after about 1 minute, you will get an error
message.
To allow MyDVD to recognize and capture the video:
a Click OK to close the error message.
b Click Done to close the Capture window.
c Press the Power on button on your video device.
d Click Capture.
For optimum quality when creating DVDs, use the Best setting
(in the MyDVD Capture window) when capturing video clips.
However, if you have limited disk space, Adaptec recommends
that you choose the Better or Good capture setting. Use this
table to estimate the amount of disk space required:
Quality / Resolution
DVD (MPEG-II)
VCD (MPEG-I)
Note: Due to Microsoft Windows FAT file system
limitations, the maximum file size you can use is 4
Gigabytes (GB). If possible, use NTSF formatted hard disk.
If you are capturing video using the Best quality setting and see
choppy images on the preview window, make sure you're
connected to a USB 2.0 port, because Best quality capturing may
exceed the bandwidth of USB 1.1.
MyDVD may not be able to recognize footage from a damaged
or degraded video tape.
32
Capture 1 minute of
Setting analog video
Good
Better
Best
Good
Disk space required for:
10 minutes of
analog video
42 MB
49 MB
57 MB
21 MB
420 MB
490 MB
570 MB
210 MB