Adaptec VideOh! DVD AVC-2210 User Manual page 17

6 Click Yes to restart your computer.
Note: If you plug your AVC-2210 into a USB 1.1 port, this
message appears during driver installation:
A hi-speed USB device is plugged into a non-hi-speed USB hub.
This message indicates that your AVC-2210 will run at a
reduced (USB 1.1) speed. To ensure maximum
performance, plug your AVC-2210 into a USB 2.0 port.
(For information on USB 2.0 adapters and hubs, go to the
Adaptec Web site at
Note: To check if the driver is installed properly, you can
follow the instructions provided in
Device Drivers? on page
www.adaptec.com
Need Help Installing Your
28.
Installing the Drivers
.)
9