Installing The Drivers - Adaptec VideOh! DVD AVC-2210 User Manual

VideOh! DVD AVC-2210 User's Guide
3 Turn on your computer if you haven't already done so, then
connect the AVC-2210 to your computer using the provided
USB 2.0 cable.
4 Insert the VideOh! Installation CD into your CD-ROM drive.
5 Turn on the AVC-2210 by pressing the Power button. The LED
on the front of the AVC-2210 will light up orange when first
powered on.
Note: If the VideOh! DVD Software Installation screen
appears, exit this screen until driver installation is
complete.
Now you are ready to install the device drivers.

Installing the Drivers

Before you can begin capturing video, you must install the VideOh!
DVD device drivers.
Installation is an easy two-step process. First you install the USB
loader, then you install the device driver. Follow the complete set
of installation instructions provided for your operating system to
ensure that the driver is properly installed :
For Windows XP, see
For Windows 2000, see
For Windows Me, see
For Windows 98SE, see
6
page 7.
page 10.
page 14.
page 16.