Advertisement
Wear an ESD wrist strap and make sure it makes good skin contact and is
1
reliably grounded.
2
Unpack the fan tray.
Orient the fan tray with the upside up and align the fan tray with the fan tray
3
slot.
Holding the upper fan tray handle with one hand and the lower fan tray
4
handle with the other hand, insert the fan tray into the slot. Keep the fan tray
as straight as possible.
5
Fasten the captive screws on the fan tray.
1
2
Removing a fan tray
!
When you remove a fan tray, do not touch the rotating fans to avoid getting
injured.
Before you replace a switching fabric module, remove the fan tray.
1
Prepare an anti-static mat.
Wear an ESD wrist strap and make sure it makes good skin contact and is
2
reliably grounded.
3
Loosen the captive screws on the fan tray.
Holding the upper fan tray handle with one hand and the lower fan tray
4
handle with the other hand, pull the fan tray outwards slowly until the fan tray
is disengaged from the chassis. Remove the fan tray after the fans stop
rotating.
5
Place the fan tray on the anti-static mat.
2
1
Documentation
To access documentation and support services, go to the Hewlett Packard
Enterprise Support Center website:
www.hpe.com/support/hpesc
5998-6757R
Advertisement
