Bosch GRL 300 HV Manual page 4

OBJ_BUCH-757-009.book Page 22 Monday, December 7, 2015 2:02 PM
22 | English
41 Screw of the alignment unit*
42 5/8" screw on wall mount*
43 Laser target plate*
Technical Data
Rotational Laser Level
Article number
1)
Working range (radius)
– without laser receiver, approx.
– with laser receiver, approx.
1) 2)
Levelling Accuracy
Self-levelling range, typically
Levelling duration, typically
Rotational speed
Aperture angle for line operation
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam Ø at the exit opening,
1)
approx.
Tripod mount (horizontal)
Batteries (NiMH)
Batteries (alkali-manganese)
Operating time, approx.
– Batteries (NiMH)
– Batteries (alkali-manganese)
Weight according to
EPTA-Procedure 01:2014
Dimensions (length x width x height)
Degree of protection
1) at 20 °C
2) alongside the axes
For clear identification of your rotational laser level, see the serial number 19 on the type plate.
Battery Charger
Article number
Rated voltage
Frequency
Output voltage
Charging current
Allowable charging temperature range °C
Charging time
Number of battery cells
Rated voltage (per battery cell)
Weight according to
EPTA-Procedure 01:2014
Protection class
1 609 92A 263 | (7.12.15)
44 Ceiling measurement plate*
45 Case
* The accessories illustrated or described are not included as
standard delivery.
GRL 250 HV
3 601 K61 6..
30 m
125 m
±0.1 mm/m
±8 % (±5°)
15 s
-1
150/300/600 min
10/25/50°
–10...+50 °C
–20...+70 °C
90 %
2
635 nm, <1 mW
5 mm
5/8"-11
2 x 1.2 V HR20 (D) (9 Ah) 2 x 1.2 V HR20 (D) (9 Ah)
2 x 1.5 V LR20 (D)
40 h
50 h
1.8 kg
190 x 180 x 170 mm
IP 54 (dust and splash
water protected)
CHNM1 Remote Control
2 610 A15 290 Article number
V~ 100–240 Working range
Hz 50/60 Operating temperature
V= 3 Storage temperature
A 1.0 Battery
0...+40 Weight according to
EPTA-Procedure 01:2014
h 14
3) The working range can be decreased by unfavourable environmental
2
conditions (e.g. direct sun irradiation).
V= 1.2
For clear identification of your remote control, see the serial number 32
on the type plate.
kg 0.12
/II
GRL 300 HV
3 601 K61 5..
30 m
150 m
±0.1 mm/m
±8 % (±5°)
15 s
-1
150/300/600 min 150/300/600 min
10/25/50°
–10...+50 °C
–20...+70 °C
90 %
3R
635 nm, <5 mW
5 mm
5/8"-11
2 x 1.2 V HR20 (D) (9 Ah)
2 x 1.5 V LR20 (D) 2 x 1.5 V LR20 (D)
30 h
50 h
1.8 kg
190 x 180 x 170 mm 190 x 180 x 170 mm
IP 54 (dust and splash IP 54 (dust and splash
water protected) water protected)
3)
–10 °C...+50 °C
–20 °C...+70 °C
1 x 1.5 V LR06 (AA)
kg
GRL 300 HVG
3 601 K61 7..
50 m
150 m
±0.1 mm/m
±8 % (±5°)
15 s
-1
10/25/50°
0...+40 °C
–20...+70 °C
90 %
3R
532 nm, <5 mW
5 mm
5/8"-11
20 h
30 h
1.8 kg
RC 1
3 601 K69 9..
30 m
0.07
Bosch Power Tools