Page 3
§1 Warranty MUTEC GmbH warrants the flawless performance of this product to the original buyer for a period of two (2) years from the date of purchase. If any failure occurs within the specified warranty period that is caused by defects in material and/or workmanship, MUTEC GmbH shall either repair or replace the product free of charge within 90 days.
AES 11, Grade 1 as well as broadcast specifications. For larger equipment set-ups, which require more clock outputs than are provided by the SMART CLOCK/ -av, MUTEC offers a complementary Word Clock signal distributor (DISTRIBUTOR ws) and an AES/EBU signal distributor (DISTRIBUTOR ae).
When the unit is installed in a rack, the rubber feets should not be used to save space! For 19 rack installation MUTEC offers an optional set of rack ears (MW-01/19 order no. 8020-005). Install the device so that one unit of rack space is left free above the device to allow for sufficient ventilation! The mounting depth including the terminals is 180 mm/7.07.
Connect the optical S/PDIF interface with the help of Toshiba TOSLINK MUTEC offers optical cables of various compliant optical fiber cables. Here, you can use both plastic and glass lengths that have been specifically tested fiber-based cables.
4 (Word Clock x 256), however, here the signal output is delay-compensated. It is used specifically to feed MUTECs Word Clock DISTRIBUTOR ws. Please read the section entitled »Delay-compensated Output of Clock Signals«.
The clock signal output described in the following is a very special feature S/PDIF + AES/EBU blank-frame outputs of your SMART CLOCK. To expand the available number of clock outputs, MUTEC offers a comple- When changing the clock frequency, mentary Word Clock signal distributor (DISTRIBUTOR ws). If only one sec-...
Need help?
Do you have a question about the SMART DIGITAL SMART CLOCK and is the answer not in the manual?
Questions and answers