Measuring Procedure; Using The Probe Tips - XONOX CT 200 Operating Manual

5.3.

Measuring procedure

1;5
Illustration 11: Switch for handling oft he measuring key
button
Illustration 12: Control of the measuring key button
5.4.

Using the probe tips

In order to avoid damages to the polished surfaces by using contaminated plastic balls in the measuring
tips, we recommend using a separate set of probe tips for measuring ground surfaces!
Page 12 of 14
2;4
X O N O X T e c h n o l o g y G m b H / / 3 5 6 2 5 H u e t t e n b e r g / / G e r m a n y
P h o n e + 4 6 6 4 4 1 9 6 3 6 4 0 / / F a x + 4 9 6 4 4 1 9 6 3 6 4 1 0 / / w w w . x o n o x - t e c . c o m
1. Upper probe DOWN (1)
2. Lower probe UP (2)
3. Measuring value is shown on measuring
gauge
4. Lower probe DOWN (3)
5. Upper probe UP (4)
Labels regarding the respective switches for the
control of the measuring key button
Operating Manual CT 200
Function and measurements