Panasonic ES-SL33 Operating Instructions Manual page 15

To remove light dirt
4. Slide the cleaning
shutter [ ] until it
A
4
clicks.
5. Clean the outer foil
section [ ] with
A

running water.
6. Turn the shaver off.
Rinse with water and
shake up and down
several times to
remove the water.
Be careful not to hit the main body on the sink or any other
object while draining the water. Failure to do so may cause
malfunction.
PB013084 - ES-SL33_(01)GB_ _05-13-16.indd 15
For heavy dirt
4. Turn the shaver off
after 10 - 20 seconds.
5. Remove the outer foil
section [ ] and turn
A

the shaver on.
6. Clean the shaver and
the outer foil section
[ ] with running
A

water.
Rinse with water and
shake up and down
several times to remove
the water.
7. Wipe off any drops of water
with a dry cloth.
8. Dry the outer foil section [
and the shaver completely in a
shaded area.
9. Attach the outer foil section to the shaver.
Cleaning with the brush
Cleaning with the long brush
Clean the system outer foil ( ),
a
the shaver body ( ) and the
b
trimmer ( c ) using the long brush.
Cleaning with the short brush
Clean the inner blades [ A ] using
the short brush by moving it in
direction (A).
Do not move the short brush in
direction (B) as it will damage
the inner blades and affect their
sharpness.
Do not use the short brush to
clean the system outer foil.
8
]
A

a c
b
(A) (B)
15
2016/5/17 9:01:12