Before You Start; Getting Started; Assembling The Stand - Silvercrest STRG 2200 A1 User Manual And Service Information


A damaged power cable must only be replaced by the
manufacturer or authorised customer service, in order to
avoid risks.

The power cable must be checked regularly for signs of
damage. The device must not be used if the power cable
is damaged.

7. Before you start

Unpack the appliance. First check whether all the parts are complete and undamaged. If any items are
missing or damaged, please phone our hotline (see "Warranty information" on page 19). Keep the
packaging material away from children and dispose of appropriately.

8. Getting started

You can use the table-top barbecue optionally with or without the stand. When used without the stand, it
can be placed directly on the dining table and prepare food in front of your guests.
If there is not sufficient space on the dining table, you can use the stand. The stand also features a
practical storage tray (14) on which you can place spices, tongs, and other accessories that you may
need during food preparation.

8.1 Assembling the stand

To assemble the stand, proceed as follows:
1. Attach the short tube (A) to the long tube (B).
2. Insert the assembled tubes from below into
one corner of the storage tray (14), until the
two bores of both tubes are aligned with the
bore on the storage tray (14).
3. Insert one of the screws (13) from the outside
and loosely secure with a wing nut (12). Do
not fully tighten the wing nut.
4. Repeat steps 1 to 3 with the 3 remaining
stand legs.
5. Place the stand legs with the storage tray
SilverCrest STGR 2200 A1
English - 13