Vrm Settings For Cpu1 (3.3V For 200 Mhz); Vrm Settings For Cpu2 (3.3V For 200 Mhz) - Mitsubishi Apricot FT2200 System Manual

Voltage ID Settings
Figure 3-21 shows the settings of jumpers J2, J3, J4, and J5 to set
CPU1 VRM connector (J1) to 3.3V at 200 MHz.
Figure 3-21

VRM Settings for CPU1 (3.3V for 200 MHz)

Figure 3-22 shows the settings of jumpers J7, J8, J9, and J10 to set
CPU2 VRM connector (J6) to 3.3V at 200 MHz.
Figure 3-22

VRM Settings for CPU2 (3.3V for 200 MHz)

Table 3-2 lists the voltage identification (VID) code indicated by four
binary-weighted inputs.
System Configuration 3-21